Document ID: OMM-00144-L VUTEk 3r & 5r Series Maintenance Guide iii
Revision History
Ver. Date Description Request #
A 01/10/2018 First revision.
B 01/11/2018 Added Grease Gun, PRESSOL part number to Printer Maintenance Log; changed wiping LED
glass to every eight hours; added chiller fluid level check; updated air quality check and
requirements.
C 01/19/2018 Changed Nylon Brush and added part number; reformatted document for flow and usability.
D 02/09/2018 Re-arranged Maintenance Task intervals; changed Semi-Annual filter maintenance to an Oper-
ator task; updated Common Maintenance Items in the Printer Maintenance Log; added addi-
tional procedures.
E 07/23/2018 • Corrected section 2.1 and Maintenance Log to clean Print Head plate with Jet Surface Cleaner
(part# 45119466) and not IPA.
• Small text edits to pgs. 37 and 38.
• DR 5165
• DR 5119
F 08/13/2018 Changes to 4hr routines and Print Head Cleaning routine. Added additional Common Mainte-
nance Items.
DR 5194
G 10/04/2018 Added printer model to top of Maintenance Log. Removed contact table and instruction text
from Log.
DR 5304
H 02/14/2019 • Added “Apply print head cleaning solution to the wipe and then” at start of step 6 for 3.2 Clean
print heads. in 4 Hour Maintenance.
• Changed IPA to roll conditioner to step 2 for 2. Clean the T (Tension) rubber roller. in 40 Hour
Maintenance
• DR 5517
• DR 5518
I 05/21/2019 Added section 8.2 Create a printer backup.
to Quarterly Maintenance DR 5687
J 10/03/2019 Updated style and added video links. Added/edited notes on pgs. 33 and 36. DR 5849
K 05/26/2020 Added section 7.5 Clean the carriage home sensor.
DR 6296
L 06/25/2020 Updated Preferences window image in Figure 5-2
DR 6327
To Next Page
Loading...
Need help?
General
