Technical Support - A.D.L. 37/83 599 74 12-51 Rev.00
9 OPERATING TIME COUNTER
Using a specific procedure, the operator can display the total operating time for the appliance, which is counted from
the moment it is first switched on.
The unit can count up to a maximum of 6,550 hours of operating time.
Only the operating time of normal programmes
(and not diagnostic cycles) is counted
The actual operating time for the cycle is counted (which does not include pauses, delayed start time, rinse hold
time and soaking phases).
The precision of the counter is 30 seconds per programme.
Only whole hours of operation
are counted (1hr and 59 min = 1hr).
9.1 Reading the operating time
Do not start the procedure with the buttons in the combination pressed
Series 6 Series 7
Switch on the appliance using the
ON / OFF button.
Turn the selector in a clockwise
direction to position five.
Press the START / PAUSE button
and the nearest option button
simultaneously (as shown in the
figure).
Hold the buttons for approximately
5 seconds.
The display shows the operating
hours.
To Next Page
Loading...
Need help?
General
