55
How to programme a
burner to switch off
To programme a burner to switch off,
proceed as follows:
1. If necessary, activate the hob by
touching the main ON/OFF Control
for about 3 seconds.
2. Light the burner and adjust the flame level
using the Increasing
or Decreasing
controls (see par. “How to light a
burner”).
3. Activate the Timer by touching the Timer
Control
and select the required
burner by repeatedly touching the Timer
Control
.
4. Set the required cooking time touching
the Increasing
and Decreasing
Controls.
(max. time: 99 minutes).
Once the cooking time has been set,
the burner selection can no longer be
changed.
If you want to change burner, you
must set the cooking time to zero by
means of the Decreasing control ,
and then change the burner selection
by touching the Timer Control
.
"
To Next Page
Loading...
Need help?
General
