63
Instructions for the installer
!!
!!
!
The following instructions about
installation and maintenance must
be carried out by qualified personnel
in compliance with the regulation in
force.
!!
!!
!
The side walls of the unit in which the
hob is going to be installed, must not
exceed the height of the working top.
!!
!!
!
Avoid installing the appliance in the
proximity of inflammable materials
(e.g. curtains, tea towels etc.).
!!
!!
!
The appliance must be electrically
disconnected before all interventions.
If any electric supply to the appliance
is required to carry out the work,
ensure all the necessary precautions
are followed.
THE MANUFACTURER WILL NOT
ACCEPT LIABILITY, SHOULD ANY
OF THE OTHER SAFETY
INSTRUCTIONS INCORPORATED
IN THIS BOOKLET OR THE
REGULATIONS IN FORCE BE
IGNORED.
Gas connection
Choose fixed connections or use a flexible
pipe in stainless steel in compliance with the
regulations in force.
If using flexible metallic pipes, be careful
they do not come in contact with mobile
parts or they are not squeezed. Use the
same attention when the hob is combinated
with an oven.
IMPORTANT - To ensure a correct
operation, a saving of energy and the long-
life of the appliance, the voltage pressure
of the appliance must correspond to the
recommended values.
To Next Page
Loading...
