61
Some operating problems may be solved with simple maintenance operations or and
without the intervention of Technical Assistance.
Something not working
! SOLUTION
!Have the fuses replaced.
!Reset the switches.
!Touch the main ON/OFF
Control
.
!Open the tap.
!
Purchase a new bottle.
!Allow the top to cool (see
par. “Protection against
overheating”).
! Deactivate the Child
Safety function (see par.
“Child Safety Function”).
!
Wait 60 seconds, then
follow the instructions
given in chapter: “In case
of ignition failure”.
! Check the correct
position (see par. “In case
of ignition failure”)
.
! Follow the instructions
given in the section
“Cleaning and
maintenance”.
! Contact an authorized
technical assistance
centre
.
!See the section “How to
light a burner”
PROBLEM
THE HOB
DOES NOT
WORK.
A BURNER
DOES NOT
WORK.
IT TAKES TOO LONG
TO FINISH THE
DISHES / THEY
ARE COOKED TOO FAST.
CAUSE
! There are blown fuses in the
domestic electrical system.
Switches are turned off or
there is no power at the
power outlet.
! The hob is not activated.
! The main gas supply tap is
closed.
! The gas bottle is empty.
! The hob has overheated and
a safety device has been set
on the four burners.
! The Child Safety function
has been inadvertently
activated.
! The safety device has been
set on the burner due to
repeated ignition failures.
The flame level indicators
and the residual heat
indicator flash.
! The pan support or the
burner cap and crown were
not correctly positioned
after cleaning.
!The burner crown holes are
obstructed.
! The defect persists.
! The flame level adjustment
is not appropriate.
To Next Page
Loading...
Need help?
General
