INSTALLATION INSTRUCTIONS | SMART LINE BOILING PAN
EN | 10-2018 DOC N° ST0 9183-02 11
4. APPLIANCE IDENTIFICATION
4.1 Rating plate
The illustration shows an example of an unla-
belled nameplate and may differ from the one on
your appliance.
There is one nameplate affixed at a clearly visible
spot on the outside of the unit. There is another
nameplate inside the appliance which you can
see after removing the panels.
For the exact identification of your appliance,
see 'PNC'.
The eight-digit serial number (Ser. No.) on the
nameplate contains the following information:
4 25 1 0003
3. Appliance with this PNC, pro-
duced in calendar week 38
Third digit of the year in numbers
(2014)
Calender week (25)
Fourth digit of the year in numbers
(2014)
Definition of the data on the label:
Model Description of the boiling pan Max. phase load A Current
Int.code Internal code Prod. year Production year
Prod. No. Production code/codes CE CE identification
Ser. No. Serial number WEEE symbol
V ~ Supply voltage ~ phase Max. Pressure
Maximum operating
pressure,vessel
Hz Mains frequency Min. Pressure Minimum operating pressure
Tot. kW Maximum power consumption Max.temp Maximum temperature
Motor power consumption Min.temp Minimum temperature
Steam consump. Steam consumption Typ No. Vessel production, drawing number
5. CONSTRUCTION OF THE APPLIANCE
The outer and inner structure parts of the overall
appliance are made of high-quality steel.
The surface of the appliance is highly polished,
ensuring an excellent level of hygiene, universal
versatility and making it easy to clean while pre-
venting any mixing of flavours.
To Next Page
Loading...
Need help?
General
