53Use instructions
7.1.23 Clock Pwr Target
Besides standard adjustment of the power it is possible set the power in time slots, in
order to save the energy. To set the power in time slots it must be inhibited the option
that makes fixed the power for the entire period of 24 hours. To move the cursor on
“TRUE”, making it editable.
Another pressure on the knob it will switch the status to “FALSE”, making it possible to
access the time slots menu for its programming.
Now, it displays the list of time slots that has divided the entire day. Each slot is of an
hour and, for reasons of display, this list is divided into blocks of three slots correspon-
ding to three hours.
To move on time slots field and press the knob to make it editable. Set the new target
power by turning the encoder clockwise/counterclockwise to increase/decrease the
power, then press again to confirm.
Repeat the sequence of operations for the remaining slots. To move from a block to the
next, go to the item “MENU” and press.
To quickly return to the main menu to hold down the knob of the encoder.
To Next Page
Loading...
Need help?
General
