32 33
CBD6601V
GB
Step 2: Selecting a salt dose
To select the correct dose for your water type, press the Start/Pause button repeatedly. Doses are shown in the
following order: H1à H2 à H3 à H4 à H5 à H6.
Step 3: End salt dose adjustment
If you do not do anything for ve seconds, the machine switches from settings mode to stand-by mode. There
are 6 possible salt doses. Select as per the table below:
Water hardness
Salt dose setting Shown on the display
dH
1)
mmol/l
2)
0-5 0-0,9 1 H1: Quick
6-11 1,0-2,0
2
12-17 2,1-3,0 3
H3: Glass and Quick
18-22 3,1-4,0 4 * H4: ECO
23-34 4,1-6,1 5 H5: ECO and Quick
35-45 6,2-8,0 6 H6: ECO and Glass
Important!
1) German unit of water hardness.
2) Millimol per litre – international unit of water hardness.
*) Factory setting.
To nd out the hardness of your water, contact your local water supplier.
B. FILL THE RINSE-AID DISPENSER
Rinse-aid dispenser
Rinse aid is released in the nal rinse to prevent water droplets forming on the washing-up. Droplets that dry
out can leave marks and streaks. As it helps water to run off the washing-up, rinse aid also improves drying.
The dishwasher is designed to use liquid rinse aid. The rinse-aid dispenser is inside the door at the same
height as the detergent compartment. To ll the dispenser, open the door and pour rinse aid into the dispenser
until the level indicator is completely black.
The rinse-aid dispenser holds 110 ml.
Rinse-aid function
Rinse aid is added automatically in the nal rinse. This ensures thorough rinsing and prevents marks and
streaks left by drying.
To Next Page
Loading...
Need help?
General
