Emerson Digistart IS1x0043B series User Manual

Safety
Information
Rating
Data
Mechanical
Installation
Electrical
Installation
Keypad
and
Status
Quick Start
Commissioning
Operation
Programming
Diagnostics
Application
Examples
Technical
Data
Maintenance
Options
Digistart IS User Guide 31
Issue: 4 www.controltechniques.com
4.9 EMC (electromagnetic compatibility)
4.9.1 Immunity
The Digistart IS complies with the following international immunity standards as required for IEC60947-4-2:
Table 4-8 EMC immunity
Standard
Type of Immunity
Application
Level
IEC61000-2-4
Harmonics
Class 3
IEC61000-4-2
Electrostatic Discharge
Housing of equipment
Level 3
IEC61000-4-3
Radiated radio frequency field
Housing of equipment
Level 3
IEC61000-4-4
Successive rapid transients
Control and power cables
Level 4
IEC61000-4-5
Surges
Power cables
Level 4
IEC61000-4-6
Conducted radio frequency
Control and power cables
Level 3
IEC61000-4-11
Voltage dips & short time interruptions
Class 2
4.9.2 Conducted and radiated emissions
If the Digistart IS is installed in accordance with the wiring instructions, the Digistart IS complies with the following international
immunity standards:
Table 4-9 Conducted and radiated emissions
Standard
Emissions
Level
IEC60947-4-2
Conducted on power supply from 150 kHz to 30MHz
Complies
IEC60947-4-2
Radiated emissions from 30 to 1000 MHz (CISPR 11 Group 1 class B)
Complies

Emerson Digistart IS1x0043B series Specifications

General

Brand	Emerson
Model	Digistart IS1x0043B series
Category	Controller
Language	English