Name: Emerson Fisher FIELDVUE DVC6000f
Brand: Emerson
Rating: 4 (1 reviews)

To Next Page

To Previous Page

DVC6000f Digital Valve Controllers

December 2009

1-4

Using This Manual

Procedures that require the use of the Field

Communicator have the Field Communicator symbol

in the heading.

Also included is the path required to accomplish

various tasks; the sequence of steps through the Field

Communicator menus. For example, the path to

Resource Block Mode is RB > Configure/Setup >

Setup > Resource Block Mode.

An overview of the Field Communicator resource block

and transducer block menu structures are shown at

the beginning of this manual. Menu structures for the

function blocks are included with each function block

section in Detailed Setup / Blocks.

Throughout this document, parameters are typically

referred to by their common name or label, followed by

the parameter name and index number; for example,

Write Priority (WRITE_PRI [39]). However, not all

interface systems support the use of the parameter

label and instead use only the Parameter Name,

followed by the index number, when referring to the

block parameters.

Specifications

Specifications for DVC6000f digital valve controllers

are shown in table 1-1.

Related Information

Fieldbus Installation and Wiring

Guidelines

This manual describes how to connect the fieldbus to

the digital valve controller. For a technical description,

planning, and installation information for a FOUNDATION

fieldbus, refer to the FOUNDATION fieldbus Technical

Overview available from the Fieldbus Foundation and

Fieldbus Installations in a DeltaV System available

from your Emerson Process Management sales office.

Emerson Fisher FIELDVUE DVC6000f User Manual

Questions and Answers: