Page 32 of 40
Auto Select
Once entered, options for ‘Individual’ and ‘All’ automatic channel selections will be available.
Individual; individual Device to RCC communication channels can only be automatically selected whilst
no devices are added to the RCC. This option will allow a scanning time to be selected between 1-60
mins. In this time the frequency channels will be scanned and at the end of the timer, the two
best channels for use will be selected:
Front Display Radio Channels Auto Select RCC RCC Ch
All; all of the RCCs Device to RCC radio channels can automatically selected whilst no devices are added
to the system. This option will allow a scanning time to be selected between 1-60 mins. In this time the
frequency channels will be scanned and at the end of the timer, the two best channels for each RCC will
be selected:
Front Display Radio Channels Auto Select Device RCC Ch
Advanced
Within this menu, a selection of advanced options are available.
Front Display Advanced
Change Address; this menu allows the Loop number and address of a device to be changed if required.
Front Display Advanced Change Address
Device RCC Listing; this menu allows you to view all of the devices assigned to each RCC. Once the
desired RCC has been selected, devices can be viewed by scrolling through the list of devices.
Front Display Advanced Device RCC Listing
©2019 EMS Ltd. All rights reserved. MK98 Iss17 05/04/2019 AJM
To Next Page
Loading...
Need help?
General
