113
Scanning Settings for Special Documents
You need to select specific options on the Main Settings tab in Epson Scan 2 when scanning special
originals.
Note: When using Document Capture Pro, open the Epson Scan 2 screen by clicking the Detailed
Settings button on the Scan Settings screen.
Note: When using Epson Scan Smart, open the Epson Scan 2 screen by clicking the Settings button >
Scanner Settings tab > Scan Settings.
Type of original Required settings
Envelope Select Off as the Detect Double Feed setting.
Plastic card Select Plastic Card as the Document Size setting or select
Off as the Detect Double Feed setting.
Carrier sheet If you select Auto Detect as the Document Size setting,
paper skew is automatically corrected even if the Correct
Document Skew setting is set to Off.
If you select a setting other than Auto Detect as the
Document Size setting, you can only use Contents Skew
as the Correct Document Skew setting. As paper skew is
not applied in this case, only contents skew is corrected
when you select the Paper and Contents Skew setting.
Passport/Passport carrier sheet
Select Auto Detect as the Document Size setting.
You need to set this to save only the ID page of your
passport. Select Passport from the Scan Settings menu,
and select Settings as the Document Size setting. Select
Save ID page only when scanning passports on the
Document Size Settings screen.
Large originals If the Document Size list does not contain the document
size you want to scan, select Customize to create a custom
size.
Booklets Select Booklets from the Scan Settings menu (DS-C490).
To Next Page
Loading...
Need help?
General
