92
Scanning
You can scan your originals and save them as digital files.
Starting a Scan
Starting a Scan
After placing your originals on your product for scanning, start scanning using one of these methods.
Note: You can also scan using Document Capture Pro (Windows) or Document Capture (Mac).
Starting a Scan from a Scanner Button
Starting a Scan Using the Epson Scan 2 Icon
Starting a Scan from a Scanning Program
Scanning with Document Capture Pro or Document Capture
Scanning in Epson Scan 2
Scan Resolution Guidelines
Scanning Special Projects
Parent topic: Scanning
Starting a Scan from a Scanner Button
You can scan using the start button on your scanner. This automatically starts Document Capture
Pro (Windows) or Document Capture (Mac) and the scan job you have assigned to the button.
Note: Make sure Epson Scan 2 and Document Capture Pro (Windows) or Document Capture (Mac) are
installed on the computer connected to the scanner.
1. Load an original in your scanner.
2. Press the start button.
The scanner starts the job that was assigned to the start button in Document Capture Pro
(Windows) or Document Capture (Mac).
Note: You can view or change the scan settings using Document Capture Pro (Windows) or
Document Capture (Mac).
To Next Page
Loading...
Need help?
General
