EasyManuals Logo
Home>Epson>Projector>EB-2247U

Epson EB-2247U User Manual

Epson EB-2247U
203 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #116 background imageLoading...
Page #116 background image
Crestron RoomView Support
116
If you are using the Crestron RoomView network monitoring and control
system, you can set up your projector for use on the system
(EB2247U/EB2142W/EB2042/EB990U/EB980W/EB970/EB109W/EB108
/EB107/EBW39/EBX39). Crestron RoomView lets you control and monitor
your projector using a Web browser.
a
You cannot use the Epson Web Control feature or the Message
Broadcasting feature in Epson Projector Management when you use
Crestron RoomView.
If you set the Standby Mode setting to Communication On in the
projector's ECO menu, you can control the projector even if the
projector is in standby mode (when the power is off).
s ECO > Standby Mode > Standby Mode
For additional information on Crestron RoomView, visit the Crestron Web
site.
http://www.crestron.com
To monitor devices in the system, you can use Crestron RoomView Express
or Crestron RoomView Server Edition provided by Crestron. You can
communicate with the help desk and send emergency messages. See the
following Web site for details.
http://www.crestron.com/getroomview
This manual describes how to perform operations on your computer using a
Web browser.
gg Related Links
"Setting Up Crestron RoomView Support" p.116
"Controlling a Networked Projector Using Crestron RoomView" p.116
"Projector Setup Settings - ECO Menu" p.144
Setting Up Crestron RoomView Support
To set up your projector for monitoring and control using a Crestron
RoomView system, make sure your computer and projector are connected to
the network. If you are connecting wirelessly, set up the projector using the
Advanced network connection mode.
a
Press the [Menu] button on the control panel or remote control.
b
Select the Network menu and press [Enter].
c
Select Network Configuration and press [Enter].
d
Select the Others menu and press [Enter].
e
Set the Crestron RoomView setting to On to allow the projector to be
detected.
f
When you have finished selecting settings, select Complete and follow
the on-screen instructions to save your settings and exit the menus.
g
Turn off the projector, and then turn it on again to enable the setting.
Controlling a Networked Projector Using Crestron
RoomView
Once you have set up your projector to use Crestron RoomView, you can
control and monitor projection using a compatible Web browser.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Epson EB-2247U and is the answer not in the manual?

Epson EB-2247U Specifications

General IconGeneral
Matrix size0.67 \
Number of colors1.073 billion colors
Native aspect ratio16:10
Projection distance1.5 - 8.9 m
Vertical scan range200 - 240 Hz
Projection technology3LCD
Contrast ratio (dynamic)-
Contrast ratio (typical)15000:1
Screen size compatibility30 - 300 \
Projector native resolution1080p (1920x1080)
Keystone correction, vertical-30 - 30 °
Projector brightness (economic mode)2410 ANSI lumens
Lamp power230 W
Light source typeLamp
Lamp power (economic mode)- W
Service life of light source5500 h
Service life of light source (economic mode)12000 h
FocusManual
Throw ratio1.39 - 2.23:1
Zoom capabilityYes
Focal length range23 - 38.4 mm
Aperture range (F-F)1.5 - 2
3DNo
Color modes (2D)Cinema, Dynamic
Video processing10 bit
Video color modesBlackboard, Dynamic, Photo, Presentation, sRGB
Composite video in1
USB connector typeUSB Type-A, USB Type-B
HDMI connector typeFull-size
Serial interface typeRS-232C
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
VGA (D-Sub) ports quantity3
Component video (YPbPr/YCbCr) in0
Wi-Fi standards802.11a, Wi-Fi 5 (802.11ac), 802.11b, 802.11g, Wi-Fi 4 (802.11n)
Ethernet LAN data rates10, 100, 1000 Mbit/s
Noise level37 dB
Country of originPhilippines
Noise level (economic mode)29 dB
RMS rated power16 W
PlacementDesktop
Product typeStandard throw projector
Product colorWhite
Power sourceAC
AC input voltage220 - 240 V
AC input frequency50 - 60 Hz
Power consumption (typical)331 W
Power consumption (economy mode)227 W
Storage temperature (T-T)-10 - 60 °C
Operating temperature (T-T)5 - 35 °C
Storage relative humidity (H-H)10 - 90 %
Operating relative humidity (H-H)20 - 80 %
Cables includedAC, VGA
Bundled softwareEpson Projector Management Software, EasyMP Multi PC Projection
Pallet width800 mm
Pallet height6870 mm
Pallet length1200 mm
Pallet width (UK)1000 mm
Quantity per pack1 pc(s)
Quantity per pallet72 pc(s)
Quantity per pallet layer6 pc(s)
Harmonized System (HS) code85286200
Weight and Dimensions IconWeight and Dimensions
Depth282 mm
Width309 mm
Height90 mm
Weight3200 g
Package depth390 mm
Package width170 mm
Package height385 mm
Package weight4.39 g

Related product manuals