Epson EX31 User Manual

28 Setting Up the Projector
Connecting to the USB Port
You can connect a Windows Vista, XP, or Windows 2000 (SP4)
computer to the projector’s
TypeB (square) USB port and
project your computer’s display. A USB 2.0 connection
(recommended) provides better picture quality and response than
USB 1.1.
The first time you connect a computer to the projector’s USB port,
software from the projector is installed on your computer.
1. Follow the instructions beginning on page 40 to turn on the
projector.
2. Make sure the
USB Type B setting on the Extended menu is set
to
USB Display (see page 70).
3. Turn on your computer.
4. Connect the square end of a USB cable to the projector’s
TypeB
(square) USB port.
note
The USB Display feature
does not support Mac OS.
USB TypeB port
EX31
EX51/EX71
USB TypeB port

Epson EX31 Specifications

Projection System

projection system	Epson 3LCD, 3-chip technology
projection method	Front/rear/ceiling mount
driving method	Epson Poly-silicon TFT Active Matrix

Display Performance

white light output	2500 lumens
color light output	2500 lumens
native resolution	800 x 600 (SVGA)

Power and Consumption

power supply voltage	100 – 240 V ±10%, 50/60 Hz
power consumption	280 W, 0.3 W standby
lamp type	200 W UHE

Operating Environment

operating temperature	41 ˚ to 95 ˚F (5 ˚ to 35 ˚C)
fan noise (normal mode)	34 dB
fan noise (eco mode)	29 dB

Dimensions and Weight

dimensions including feet	11.6" x 9.0" x 3.1"
dimensions excluding feet	11.6" x 9.0" x 3.0"
weight	5.1 lb