82 Maintaining the Projector
4. Slide the new air filter into the slot until it clicks into place.
Replacing the Lamp
The life span of the projection lamp is about 4000 hours if Power
Consumption
in the Settings menu is Normal (default), and 5000
hours if this setting is
ECO. See page 85 to check the lamp usage.
It is time to replace the lamp when:
■ The projected image gets darker or starts to deteriorate.
■ The message Replace the lamp appears on the screen and the
Lamp light flashes orange. To maintain projector brightness
and image quality, replace the lamp as soon as possible.
You may also need to replace the lamp if the
Lamp light flashes
red. See page 91.
note
Turn off this product when
not in use to prolong the life
of the projector.
Lamp
light
To Next Page
Loading...
Need help?
Projection System
