Epson EX31 User Manual

40 Setting Up the Projector
If you are connected to another image source, press the
USB
button on the remote control to go to the Slideshow program.
5. See page 59 for instructions on controlling the slideshow.
6. When you’re finished, press
Esc and select Exit to exit the
Slideshow before turning off or removing the USB device.
Be sure to turn off your USB device (if necessary) before you remove
the device or cable from the projector. Failure to do so may damage
the device and/or the projector.
Turning the Projector On and Off
Turn on any connected computer or video equipment before starting
the projector so it can automatically detect and display the image
source. If you turn on the projector first, or have multiple pieces of
connected equipment, you may have to select the image source
manually (see page 46).
Follow these steps to turn on the projector:
1. Open the
A/V Mute slide (lens cover).

Epson EX31 Specifications

Projection System

projection system	Epson 3LCD, 3-chip technology
projection method	Front/rear/ceiling mount
driving method	Epson Poly-silicon TFT Active Matrix

Display Performance

white light output	2500 lumens
color light output	2500 lumens
native resolution	800 x 600 (SVGA)

Power and Consumption

power supply voltage	100 – 240 V ±10%, 50/60 Hz
power consumption	280 W, 0.3 W standby
lamp type	200 W UHE

Operating Environment

operating temperature	41 ˚ to 95 ˚F (5 ˚ to 35 ˚C)
fan noise (normal mode)	34 dB
fan noise (eco mode)	29 dB

Dimensions and Weight

dimensions including feet	11.6" x 9.0" x 3.1"
dimensions excluding feet	11.6" x 9.0" x 3.0"
weight	5.1 lb