Fine-Tuning the Projector 77
3. Select Full Lock (to lock all projector buttons) or Partial Lock (to
lock all buttons except the Ppower button) and press
Enter.
4. Select
Yes and press Enter to confirm the setting.
5. Press the
Menu button to exit.
To disable the Control Panel Lock function, select
Off in the Control
Panel Lock menu. Or press and hold the
Enter button on the
projector’s control panel for seven seconds. A message is displayed and
the lock is released.
Using Security Locking
The projector includes two security locking points to prevent its theft
when installed or used in public locations:
■ Security cable attachment. You can attach a commercially
available security cable as shown below to secure the projector to a
table or ceiling mount.
■ Kensington security slot. The security slot (located on the side
of the projector) is compatible with the MicroSaver security
systems manufactured by Kensington. You can purchase this lock
from Epson (see page 16).
Security cable
attachment
Kensington
security slot
To Next Page
Loading...
Need help?
Projection System
