90
Product Light Status
You can often diagnose problems with your product by checking its lights.
Lights
1
power
2 error
Light status Condition/solution
The power light is on
The product is turned on.
The power light is flashing The product is busy. Wait for the power light to stop flashing before
turning off the product.
If you just filled the ink, the power light will flash for approximately 20
minutes. Do not cancel this process.
The power light is flashing
The error light is flashing
Paper may be jammed in the product. Remove any jammed paper, and
press the cancel button to clear the error.
If the lights still flash, there may be a product error. Turn the product off,
check inside for jammed paper or foreign objects, then turn the product
back on. If the error continues, contact Epson for support.
To Next Page
Loading...
Need help?
General
