Epson L1250 Series User Manual

Buttons and Functions
A
Turns the printer on or o.
Unplug the power cord after checking that the power light is o.
B
When a network error occurs, pressing this button cancels the error. Hold this button down for more than 5
seconds to perform Wi-Fi auto setup using the WPS push button.
C
Prints a network connection report allowing you to determine the causes of any problems you may have using the
printer on a network. If you need more detailed network settings and connection status, hold this button down for
at least 7 seconds to print a network status sheet.
D
Stops the current operation.
Hold this button down for ve seconds until the
P button ashes to run print head cleaning.
Functions using Button Combination
+
PIN Code Setup (WPS)
Hold down the
and buttons simultaneously to start PIN Code Setup (WPS).
+
Wi-Fi Direct (Simple AP) Setup
Hold down the
and buttons simultaneously to start Wi-Fi Direct (Simple AP) Setup.
+
Restore Default Network Settings
Turn the printer on while holding down the
button to restore the default network settings.
When the network settings are restored, the printer turns on and the network status lights
ash
alternately.
+
Print Nozzle Check Pattern
Turn the printer on while holding down the
y button to print the nozzle check pattern.
The total number of pages fed through the printer is also printed as well as the nozzle check
pattern.
Guide to the Control Panel > Buttons and Functions
17

Epson L1250 Series Specifications

General

Brand	Epson
Model	L1250 Series
Category	Printer
Language	English