Epson L8180 User Manual

247
2 Print head rail
Caution: Do not touch the print head rail or you may not be able to print. Do not wipe off the grease
on the rail.
6. Moisten a cotton swab with the water and detergent mixture and squeeze out any excess moisture,
then lightly wipe the ink off the translucent film.
Caution: Do not press too hard on the film or you may dislocate the anchor springs and damage
your product.
7. Use a new, dry cotton swab to dry the translucent film.
8. Repeat steps 6 and 7 as necessary to clean all ink smears.
9. When the translucent film is dry and free of any fibers, close the scanner unit.
10. Reconnect any disconnected cables, plug in the power cord, and turn on the product.
Parent topic: Adjusting Print Quality
Related tasks
Aligning the Print Head Using the Product Control Panel
Cleaning the Paper Rollers
If you encounter repeated paper feed issues from the cassette, clean the paper rollers inside the
product.
1. Turn off the product.
2. Unplug the power cable.
3. Disconnect any connected cables.

Epson L8180 Specifications

General

Print Technology	Inkjet
Maximum Print Resolution	5760 x 1440 dpi
Ink Type	Dye-based
Number of Ink Colors	6
Connectivity	USB, Wi-Fi, Ethernet
Functions	Print, Copy, Scan
Memory Card Compatibility	SD, SDHC, SDXC
Ink Tank System	Yes
Paper Sizes Supported	A4, A5, A6, B5, Letter, Legal, 10 x 15 cm, 13 x 18 cm, 16:9
Duplex Printing	Yes
Scanner Type	Flatbed
Display	4.3-inch Color LCD
Printing Speed ISO/IEC 24734	16 ppm (black), 12 ppm (color)
Scanning Resolution	1200 x 4800 dpi
Print Speed (Black)	16 ppm
Print Speed (Color)	12 ppm
Ink Cartridge Configuration	6 individual ink tanks
Paper Capacity	100 sheets