Starting and Canceling
Printing
Starting
A
When receiving the job is complete, the message
Place shirt and press
to start printing. is
displayed on the screen.
When receiving the job is complete, the x light
also turns on.
Preview display
When you press the d button while the message
is displayed, a preview of the job is displayed.
B
Check that the T-shirt is loaded, and then press
the x button.
Note:
When you press the - button while the message is
displayed, the maintenance menu is displayed and you
can select Nozzle Check or Head Cleaning without
canceling the received job. You can check if nozzles are
clogged and clean the head before printing starts or while
printing multiple copies.
If you select Nozzle Check, the check pattern is printed at
the platen size displayed on the control panel screen.
Canceling
Use this when you want to cancel printing, or to cancel a
job that is being received by the printer.
A
Press the + button.
B
Press the u/d buttons to highlight Yes, and then
press the Z button.
Printing or receiving stops immediately when
the button is pressed, and the job is deleted.
SC-F2100 Series Operator's Guide
Basic Printing
25
To Next Page
Loading...
Need help?
General