Maintenance
When to Perform Various Maintenance Operations
To maintain the print quality of the printer, you need to perform cleaning and replace consumables.
If maintenance is not performed, print quality may decline, the printer's service life may be reduced, or you may be
liable for the cost of any repairs. Always perform maintenance when a message is displayed on the screen.
Cleaning Locations and Cleaning Timing
When to perform Component to be cleaned
When It is time to clean the Sensor
Cover. appears on the control panel
screen
B Cleaning the sensor cover
U “Cleaning the Sensor Cover” on page 81
You can check the procedure in a video on YouTube.
Epson Video Manuals
❏ The printing surface and other areas
are soiled even after cleaning the caps
❏ When printing is not performed
normally even after head cleaning
A Clean around the print head and the edges of the metal
U “Clean around the print head and the edges of the metal” on page 83
You can check the procedure in a video on YouTube.
Epson Video Manuals
SC-F3000 Series User's Guide
Maintenance
76
To Next Page
Loading...
Need help?
General