Cut Sheet(1 sheet) menu
e Paper Setting menu is displayed if paper is loaded.
*Default setting
Settings item Settings value Explanation
Remove Touch to eject set cut sheet (1 sheet) without printing. Touch to
eject to the front.
U “Removing Cut Sheet (1 Sheet)” on page 38
Media Adjust Start Run this adjustment when there is a problem with print results,
or after registering custom paper settings.
Touch Start to print an adjustment pattern. Then, follow the
on-screen instructions to make adjustments.
Adjustment results will be saved as the currently selected paper
type settings.
U “Optimizing Paper Settings (Media Adjust)” on page 43
Change Paper Type/Paper Size
Paper Type
Plain paper
*
Select the type of paper loaded. The three options other than
Others display the most recently selected paper type. When the
desired paper type is not displayed, touch Others to display
these, and select.
U “For Auto Sheet Feeder / Cut Sheet(1 sheet)” on page 41
Coated
Paper(Generic)
Premium Glossy
Sheet
Others
Paper Size A Series Select the size of paper loaded.
If the desired size is not in the options, then select User-Dened,
and enter the paper width and length.
US-ANSI
US-ARCH
B Series (ISO)
B Series (JIS)
Others
User-Dened
SC-T5100 Series/SC-T3100 Series/SC-T5100N Series/SC-T3100N Series User's Guide
Using the Menu
113
To Next Page
Loading...
Need help?
General