Specications
Table
e (A) to (D) letters used in the table represent the
printer models as shown below.
(A): SC-T5100 Series
(B): SC-T3100 Series
(C): SC-T5100N Series
(D): SC-T3100N Series
Printer Specications
Printing method On-demand ink jet
Nozzle congura‐
tion
800 nozzles × 4 colors
(Black, Cyan, Magenta, Yellow)
Resolution (maxi‐
mum)
2400 × 1200 dpi
Control code ESC/P2, ESC/P raster (undisclosed
command), ESC/P3, ESC/P-R,
HP-GL/2, HP RTL, PJL
Built-in memory 1.0 GB
Rated voltage AC100-240 V
Rated frequency 50/60 Hz
Rated current 1.4 A
Power consumption
Printing Approx. 28 W
Ready mode Approx. 8 W
Sleep mode Approx. 1.6 W
Power o Approx. 0.2 W
Temperature
Printing 10 to 35°C (15 to 25°C is
recommended)
In storage (before
unpacking)
-20 to 60°C (within 120 hours at
60°C, within a month at 40°C)
In storage (after
unpacking)
Ink charged: -10 to 40°C (within a
month at 40°C)
Ink discharged
*1
: -20 to 25°C
(within a month at 25°C)
Humidity
Printer Specications
Printing 20 to 80% (40 to 60% is
recommended. Without
condensation)
In storage 5 to 85% (without condensation)
Temperature and humidity range for operating (the range
shown by diagonal lines is recommended)
Dimensions (Width × Depth × Height)
Maximum
*2
(A): 1268 × 982 × 913 mm
(B): 970 × 982 × 913 mm
(C): 1268 × 811 × 230 mm
(D): 970 × 811 × 230 mm
Storage (A): 1268 × 696 × 913 mm
(B): 970 × 696 × 913 mm
(C): 1268 × 505 × 230 mm
(D): 970 × 505 × 230 mm
Weight
*3
(A): Approx. 46 kg
(B): Approx. 38 kg
(C): Approx. 33 kg
(D): Approx. 27 kg
*1 Use the Discharging/Charging Ink menu in the
Maintenance menu to discharge ink from the printer.
U “Handling if Transporting/Leaving the Printer in an
Environment of -10°C or Less” on page 167
*2 With the paper basket is opened and the paper stacker is
attached
*3 Not including the ink cartridges and the paper stacker
c
Important:
Use the printer at an altitude of 2000 m or less.
SC-T5100 Series/SC-T3100 Series/SC-T5100N Series/SC-T3100N Series User's Guide
Appendix
171
To Next Page
Loading...
Need help?
General