Epson SC-T5100 User Manual

For Auto Sheet Feeder / Cut
Sheet(1 sheet)
Congure the following settings aer loading paper in
the Auto Sheet Feeder or loading Cut Sheet(1 sheet).
Paper Type Settings
is is the most important setting to obtain the
optimum print results. Not setting a paper type that
matches the loaded paper will cause wrinkles, scung,
uneven colors, and other trouble.
Paper Size Setting
e paper size of paper loaded in the auto sheet feeder
or loaded Cut Sheet(1 sheet) is not detected
automatically. Set the size of the loaded paper.
How to Set
A
e
currently set paper type is shown on the
screen displayed
aer
loading cut sheet.
When changing Paper Type
Proceed to step 2.
When changing Paper Size without changing
Paper Type
Proceed to step 4.
When not changing either of them
Tou ch OK. You can start printing once Ready
appears on the screen.
Note:
e settings are conrmed if no operations are
performed for 90 seconds on the above screen. To
change the settings later, touch the following in
order from the Home screen and then congure
the settings.
❏ Auto Sheet Feeder
Paper Setting - Auto Sheet Feeder - Change
Paper Type/Paper Size
❏ Cut Sheet(1 sheet)
Paper Setting - Cut Sheet(1 sheet) - Change
Paper Type/Paper Size
B
Tou ch Paper Type.
e following paper type selection screen
appears.
Note:
e most recently selected three paper types are
displayed in addition to Others.
C
Select the paper type that matches the loaded
paper.
Epson Special Media
Select the same product name as the one shown
on the package of the paper.
Commercially available non-Epson paper
Select from the following commercially
available paper types.
❏ Plain paper
❏ Coated Paper(Generic)
❏ Photo Paper(Generic)
❏ Tracing Paper
❏ Tracing Paper <LowDuty>
❏ Matte Film
SC-T5100 Series/SC-T3100 Series/SC-T5100N Series/SC-T3100N Series User's Guide
Loading and Setting the Paper
41

Epson SC-T5100 Specifications

General

Brand	Epson
Model	SC-T5100
Category	Printer
Language	English