Your problem is not listed here.
o
Decide whether the trouble is caused by the
printer driver or the application. (Windows)
Perform a test print from the printer driver so that
you can check that the connection between the
printer and computer is correct and the printer
driver settings are correct.
(1) Make sure that the printer is turned on and in
ready status, and load A4 or larger paper.
(2) Open the Devices and Printers, Printers, or
Printers and Faxes folder.
(3) Right-click the printer icon, and select
Properties.
(4) In the Properties dialog, select the General tab
and click Print Test Page.
After a while the printer starts to print a test page.
❏ If the test page is printed correctly, the
connection between the printer and computer
is correct. Go to the next section.
❏ If the test page is not printed correctly, check
the items above again.
U “You cannot print (because the printer
does not work)” on page 142
The "Driver Version" shown on the test page is the
version number of the Windows internal driver. This
diers from the Epson printer driver version that you
installed.
The printer sounds like it is
printing, but nothing prints
o
Conrm the printer operation.
Print a nozzle check pattern.
U “Checking for Clogged Print Head, and
Cleaning” on page 134
If there are no gaps in the nozzle check pattern,
then the printer is not damaged. Check the
following item.
o
Is the message Motor self adjustment
running. displayed on the control panel's
screen?
The printer adjusts the internal motor. Wait for a
while without turning
o
the printer.
SC-T5100 Series/SC-T3100 Series/SC-T5100N Series/SC-T3100N Series User's Guide
Problem Solver
144
To Next Page
Loading...
Need help?
General