Epson SC-T5100 User Manual

A
Turn on the printer, and load a number of
sheets of A3 size plain paper in the auto sheet
feeder.
U “Loading Paper in the Auto Sheet Feeder”
on page 34
B
From the Home screen, touch Settings -
Maintenance - Paper Guide Cleaning.
C
Tou ch Start.
e paper is ejected.
D
Conrm
if there is any soiling on the ejected
paper.
❏ If there is soiling: Touch and hold Run Again
until the soiling is gone.
❏ If there is no soiling: Touch Done to complete
roller cleaning.
The paper is creased.
o
Are you using the printer at normal room
temperature?
Epson special media should be used at normal room
temperature (temperature: 15 to 25°C, humidity: 40
to 60%). For information about paper such as thin
paper from other manufacturers that requires
special handling, see the documentation supplied
with the paper.
o
Is there a gap between both edges of the
roll paper and the anges?
Conrm that the spindle anges are right up against
both edges of the roll paper, with no gaps. If there
are any gaps, then the paper is fed at an angle, and
this may result in wrinkling.
U “Loading Roll Paper” on page 28
o
Has Media Adjust been carried out?
Conrm
that paper type settings that match the
paper being used, and perform Media Adjust.
U “Setting Loaded Paper” on page 39
U “Optimizing Paper Settings (Media Adjust)” on
page 43
o
Is the roll paper tension weak?
If wrinkles occur on the roll paper, increase the
paper tension settings. In the roll paper information
eld
- Advanced Media Setting - Back Tension,
select High or Extra High.
The reverse side of the printed paper
is soiled.
o
Is ink dry on the printed surface?
Depending on the printing density and media type,
the ink may take a while to dry. Do not stack the
paper until the printed surface is dry.
Additionally, setting the drying time on the printer
in Roll Paper - Advanced Media Setting - Drying
Time - Drying Time per Page to a longer time will
stop post-print processing (ejection, cutting),
waiting for the paper to dry naturally.
U “Roll Paper menu” on page 109
Blurred text, lines, and images
o
Is the Media Type setting correct?
Conrm that the paper type selected with the
printer matches the paper being used, and that the
printer driver Media Type settings are Use Printer
Settings. The amount of ink to be red is controlled
according to the media type. If the settings do not
match the paper loaded, too much ink may be red.
U “Setting Loaded Paper” on page 39
o
Is the Color Density setting appropriate?
On the printer driver Advanced screen, click Paper
Conguration, and decrease the ink density. The
printer may be printing with much ink for some
paper. We recommend that black and color
densities be decreased similarly.
o
Are you printing on tracing paper?
If too much ink is discharged, on the printer driver
Advanced screen, click Paper Conguration, and
decrease the ink density. Alternatively, changing
Paper Type to Tracing Paper <LowDuty> may
result in an improvement.
SC-T5100 Series/SC-T3100 Series/SC-T5100N Series/SC-T3100N Series User's Guide
Problem Solver
149

Epson SC-T5100 Specifications

General

Brand	Epson
Model	SC-T5100
Category	Printer
Language	English