Epson TM-m30II User Manual

48
Chapter 3 Advanced Usage
Functions
Receive buffer capacity
• 4KB (initial setting)
• 45 bytes
BUSY condition
• Receive buffer full/Offline (initial setting)
• Receive buffer full
Auto line feed
• Normally disabled (initial setting)
• Normally enabled
USB power-saving function
• Disabled
• Enabled (initial setting)
Customized Values
Font B auto replacement

Font C auto replacement

Multi-tone print density 
Optional buzzer

Batch rotate print (Upside Down)

Communication condition of USB interface 
Communication condition of Bluetooth interface

Bluetooth communication interval during power
saving mode

• For information about how to use the software setting mode, see "Software Setting Mode" on
pa
ge 64.
• All the
settings are available using the ESC/POS commands.
The receive buffer capacity for the Bluetooth interface is 64 K bytes.
In either case above, the printer enters the BUSY state after power is turned on, and when a self-test
is being run.
Item\Method
TM Utility for iOS,
for Android
TM-m30II Utility
for Windows
Software
Setting Mode

Epson TM-m30II Specifications

General

Type	POS printer
Character sets	ANK
Print technology	Direct thermal
Maximum resolution	203 x 203 DPI
Maximum roll diameter	83 mm
Supported paper width	58 mm - 80 mm (Breite) mm
Maximum printing width	80 mm
Power plug type	Type G
Power source type	AC
USB port	Yes
USB connector	USB Type-A / USB Type-B
USB 2.0 ports quantity	2
Connectivity technology	Wired
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	5 - 45 °C
Operating relative humidity (H-H)	10 - 90 %
Wi-Fi	No
Internal memory	- MB
Built-in barcodes	-
Country of origin	Philippines
Mounting position	Horizontal/Vertical
Autocutter durability	1.5 million cuts
Built-in sensors details	Paper End Sensor, Papier-Sensor
Sound pressure level (printing)	55 dB
Mean time between failures (MTBF)	360000 h
Product color	White
Print head life	150.000.000 Impulse
Mean cycles between failures (MCBF)	65000000
Pre-installed software	TMNet WebConfig, ePOS-Device, ePOS-Display, ePOS-Print
Package depth	240 mm
Package width	200 mm
Package weight	2150 g
Quantity per pack	1 pc(s)
Quantity per pallet	128 pc(s)
Quantity per pallet (UK)	192 pc(s)
Master (outer) case width	400 mm
Master (outer) case height	255 mm
Master (outer) case length	490 mm
Master (outer) case weight	0 g
Harmonized System (HS) code	84433210
Quantity per master (outer) case	4 pc(s)

Weight and Dimensions

Width	127 mm