VII. CLEANING AND MAINTENANCE
Turn off and disconnect the appliance from power supply by unplugging the plug from
electric socket before maintenance! Clean cooled down appliance only and after every
use! Before the rst use, we recommend coating the baking pan and the kneading blades
with heat resistant fat and warm them in the baker for about 10 minutes (160
o
C). Clean
(polish) the baking pan from the fat using a paper napkin after cooling down. This is to
protect the non-adhesive surface. Repeat the procedure after some time, if required. Use
a mild detergent for cleaning. Do not use chemicals, gasoline, oven cleaners or abrasive
or otherwise damaging detergents. Use a dampen rag to remove all the ingredients and
crumbs from the lid, housing and baking space. Never soak the bread baker in water
or ll the baking space with water! Wipe the outer areas of the baking pan with a
dampen rag. Use a detergent to clean inner areas of the pan. Clean the blades and shafts
immediately after use. If the blades are retained in the pan, it will be harder to remove them
out. In this case, ll the pan with hot water and let it standing for about 30 minutes. Then,
remove the kneading blades. Do not soak the baking pan in water for too long; rotation
of shafts would be impaired. The baking pan is coated by a non-adhesive coating. Do not
use metal tools with potential to scratch the surface. It is normal when the surface colour
changes over time. However, this change has no effect on the surface properties.
VIII. ENVIRONMENT
If the size of the appliance allows, all the parts contain marking of the materials used
for production packaging, components and accessories as well as for recycling. The
symbols on the product or in the accompanying documentation mean that the electrical
or electronic product used must not be liquidated together with communal waste. To
ensure the appropriate liquidation take the used appliance to a collection point where it
will be accepted free of charge. Correct liquidation of the product helps to protect valuable
natural resources and helps to prevent a potential negative impact on the environment and
human health which can be the outcome of inappropriate liquidation of waste. More details
can be obtained from your local authorities or the closest collection point. Inappropriate
manipulation of such waste can result in a ne according to the national legislation.
Maintenance of a serious nature or maintenance which requires interference with
the internal parts of the appliance must be carried out by a professional service
centre! By failing to follow the instructions issued by the manufacturer, the right to
the warranty service will be invalidated!
To Next Page
Loading...
Need help?
General
