Evco EV3 CHIL User Manual

EVCO S.p.A.
If ON-OFF type compressors are to be used,
p
The following combinations are possible for
O
- 1 compressor without parcelling
(
- 2 independent compressors wit
h
compressor 1” and compressor
2
- 1 compressor with pacelling (CF
1
step 2 is connected to output “C
o
7.1.1 Oil refresh
If the compressor is running at a frequency l
o
at the maximum power. The compressor will
EV3 CHIL & EVD CHIL | Installer man
u
page 32 of 46
p
arameter CP08 must be set at 0.
O
N-OFF adjustment:
(
CF11 = 1; Cf12 = 0). Compressor is connected to output D
O
h
out parcelling (CF11 = 2; Cf12 = 0). Compressor 1 is
2
is connected to output “Compressor 2”.
1
1 = 1; Cf12 = 1). Compressor step 1 is connected to outp
u
o
mpressor 2”.
o
wer that the CP09 parameter for a period longer than the C
P
remain at the maximum power until it reaches the set-point.
u
al ver. 1.2 | Code 1443DCHILE124
O
4.
connected to output “Enable
u
t “Enable compressor 1” and
P
10 parameter, it is activated

Evco EV3 CHIL Specifications

General

Brand	Evco
Model	EV3 CHIL
Category	Controller
Language	English