EVOCA Kalea User Manual

16 01-2018 5035 01
DiffusEr NozzlE
For models with a diuser nozzle only.
1. Unhook the diffuser nozzle from the sup-
port bracket.
2. Separate the diffuser nozzle compo-
nents.
3. Start sanitising whilst taking care to me-
chanically remove residues and visible
films using swabs or brushes, if neces-
sary.
4. Thoroughly rinse the various compo-
nents before reassembling them.
3
2
1
4
Fig. 14
1. Cover
2. Seal
3. Diffuser
4. Diffuser nozzle body
CLEANING THE BREWING UNIT
After each load or at least once a week, it
is good practice to clean the external parts
of the brewing unit by removing any powder
residue, especially in the funnel, lter and
scraper areas.
CLEANING THE MILK TANK
For models with a cappuccino maker only.
Every day or at the end of the nal shift
of the day, the milk tank must be emptied
of any residues and sanitised, whilst tak-
ing care to mechanically remove residues
and visible lms using swabs or brushes if
necessary.
CLEANING THE WATER SUPPLY
TANK
For models with an internally-supplied wa-
ter tank only.
Every day, when the appliance has nished
being used, the internally-supplied water
tank must be emptied of any residual water
and sanitised, whilst making sure to me-
chanically remove any residues and visible
lms using swabs or brushes if necessary.

EVOCA Kalea Specifications

General

Brand	EVOCA
Model	Kalea
Category	Coffee Maker
Language	English