26 01-2018 5035 01
Only in Plus version.
iNstructioNs for wi-fi coNNEctioN
- Position the equipment where the Wi-Fi
signal is good and intense.
- Always enable security (encryption) fea-
tures to protect communications from
unauthorized access.
A network that uses a more recent encryp-
tion system is safer.
“Open” encryption does not guarantee any
type of protection.
“hotspots” (such as bars and airports,
-
tection.
- Configure the Wi-Fi settings from the
equipment connectivity menu and set the
encryption used by the network to which
the equipment will be connected.
We recommend that you enable the “fire-
wall” function from the network settings of
the equipment.
-
-
the equipment will be connected.
It is not possible to enable Ethernet and
Wi-Fi connections at the same time.
bluEtootH iNstructioNs
Verify that the Bluetooth function is active
on the equipment and on the second de-
vice.
To allow communication between the
equipment and a Bluetooth device, it is
necessary to associate the two devices
(see “network function”.
The equipment features a (not con-
unwanted access to the equipment
when connected; it is advisable to en-
able it from the programming menus.
iNstructioNs for 3g coNNEctioN
To use the 3G connection, it is neces-
sary to have a SIM card (standard for-
Insert the SIM card into the appropriate
slot on the CPU board
- Position the equipment where the 3G sig-
nal is good and intense.
- Configure the network settings from the
equipment connectivity menu.
-
-
wanted access to the equipment when
connected; it is advisable to enable it
from the programming menus.
To Next Page
Loading...
Need help?
General
