01-2018 5035 01 1
English
INTRODUCTION 2
transport and storagE 2
what to do should a malfunction occur 3
appliancE idEntification and fEaturEs 3
appliancE positioning 4
tEcHNical spEcificatioNs 4
powEr consumption 6
CLEANING AND LOADING 7
main switch and safEty mEasurEs 7
hygiEnE and clEaning 8
dispEnsing hot bEvEragEs into opEn containErs 9
coNtrols aND iNformatioN 9
loaDiNg proDucts 10
coffEE bEans 10
instant products 10
prE-ground coffEE 11
milk 11
intErnally suppliEd tank watEr 11
pErioDical opEratioNs 12
clEaning thE rEsiduE containErs 12
clEaning thE mixEr and diffusEr 14
clEaning thE nozzlEs and spouts 15
clEaning thE brEwing unit 16
clEaning thE milk tank 16
clEaning thE watEr supply tank 16
switching thE machinE on 17
wasH cyclEs 17
rinsing thE componEnts 18
cappuccino makEr wash 18
brEwing unit wash cyclE 19
clEaning thE touchscrEEn 20
sErvicE suspEnsion 20
INSTALLATION 21
unpacking thE appliancE 21
main switch and safEty mEasurEs 21
discarding thE solid and liquid rEsiduEs 22
rEmoving thE panEls 22
watEr supply 23
if thE appliancE usEs a watEr tank, appropriatE filtEr
cartridgEs can bE usEd. 24
ElEctrical connEction 25
wi-fi connEctions 26
iNitial start up 27
first sanitisation 27
opEratioN 28
variablE-dosE coffEE dosEr 32
dispEnsing milk 33
dElivEry of hot watEr from spout 33
stEam dElivEry from spout 33
calibration chEcks and sEttings 34
connEctivity 35
touchscrEEn 36
usE of usb mEmory stick 36
opEratioN iN Normal usEr status 36
dispEnsing a bEvEragE 37
appliancE status 37
systEm architEcturE 38
PROGRAMMING 39
accEssing thE programming mEnus 39
EntEring valuEs 40
daily actions 41
sElEction sEttings 41
machinE sEttings 49
machinE information 55
EnErgy saving modE 59
paymEnt systEms 60
import/ Export 63
systEm 65
connEctivity 68
MAINTENANCE 69
gEnEral introduction 69
main switch and fusE 69
maintaining thE brEwing unit 70
maintaining thE brEwing unit 72
pErioDical opEratioNs 74
sanitisation 74
clEaning thE nozzlEs and spouts 76
rEmoving thE product containErs 77
rEmoving thE sidE and rEar panEls 78
boilEr thErmal protEction 78
circuit boarD fuNctioNs 79
powEr supply 80
paymEnt form board 80
activation board 81
softwarE installation and/or updating 82
APPENDIX 83