18 01-2018 5035 01
RINSING THE COMPONENTS
Start the rinse cycle (with hot water only)
of the various components (mixer, brewing
unit, etc.).
The rinse cycles do not replace the
need to disassemble the components
for regular sanitisation.
Remove the cups from the dispensing area.
Do not place your hands under the
a danger of scalding.
For the entire duration of the rinse cycle,
the selections will remain disabled.
CAPPUCCINO MAKER WASH
For models with a cappuccino maker only.
The guided wash of the cappuccino maker
should be carried out each time that the ap-
pliance has nished being used for the day,
or more frequently, depending on how often
the appliance is used.
When the cappuccino maker needs to be
cleaned (with detergent), it signals when
the time limits and/or number of selections
have been reached.
wash cycle is performed.
products.
When using these products, strictly
follow the manufacturer's instructions
on storage, handling, dosing and use;
carefully read the safety instructions.
When using generic products, there is no
guarantee that they are hygienic, will not
alter the taste of the beverages, or will have
no consequences on human health.
For appliances that do not have a liquid
residue drainage system, place a container
with a capacity of at least 3 litres under the
nozzles in order to collect the wash resi-
dues.
The appliance automatically prepares the
washing mixture with the indicated amount
of water.
It takes several minutes for the cappuccino
maker to be washed.
The wash with detergent does not
replace the need to disassemble the
If for any reason the detergent cycle is
interrupted (e.g. manual interruption,
is restarted a new wash cycle of the
Once the wash cycle has nished, the milk-
based beverages will be available once
again.
The nished wash cycle is stored by the
appliance.
To Next Page
Loading...
Need help?
General
