EVS XT-3 User Manual

6.2.3. CODConnectivity in 3D and 1080p Dual Link
Connector Assignments
This section describes the connector assignments and layout for the video standards HD
3D and 1080p in Dual Link mode.
Connector 3D/1080p mode Connector label
J1 N/A CHAR SD
J2 SDI monitoring output (HD) Not wired to the backplane.
Used for onboard multiviewer
input
J3 HD SDI program output for right eye
(3D) or link 2 (1080p)
(HD)
OUT B
J4 SDI monitoring output for left eye (3D)
or link 1 (1080p)
(HD/SD)
CHAR OUT SD/HD
J5 HD SDI input for right eye (3D) or link 2
(1080p)
(HD)
IN B
J6 HD SDI program output for left eye (3D)
or link 1 (1080p)
(HD, identical to J7)
OUT
J7 HD SDI program output for left eye (3D)
or link 1 (1080p)
(HD, identical to J6)
OUT
J8 HD SDI input for left eye (3D) or link 1
(1080p)
(HD)
IN
J9 Alternate HD SDI input
(HD, for the internal loop)
Not wired to the backplane.
J9 of REC1 only connected to
Loop connector.
Note
The loops of the input signal are not genlocked.
92 6. Boards Description
EVS Broadcast Equipment SA Issue 12.05.C- November 2014

EVS XT-3 Specifications

General

Brand	EVS
Model	XT-3
Category	Server
Language	English