EVS XT-3 User Manual

6.2.4. CODConnectivity in 3D and 1080p Single
Link 3G-SDI
Connector Assignments
This section describes the connector assignments and layout for the video standards HD
3D and 1080p in Single Link 3G-SDI mode.
Connector 3D/1080p Mode Connector label
J1 N/A CHAR SD
J2 SDI program output 2D (HD) Not wired to the
backplane.
Used for onboard
multiviewer input
J3 SDI program output 2D
(HD)
OUT B
J4 SDI monitoring output for left eye (3D) or link 1 (1080p)
(HD/SD)
CHAR OUT
SD/HD
J5 Not installed IN B
J6 3G-SDI program output for left & right eyes (3D) or link
1 & 2 (1080p)
(3G, identical to J7)
OUT
J7 3G-SDI program output for left & right eyes (3D) or link
1 & 2 (1080p)
(3G, identical to J6)
OUT
J8 3G-SDI input left & right eyes (3D) or link 1 & 2
(1080p)
(3G)
IN
J9 Alternate 3G-SDI input
(3G, for the internal loop)
Not wired to the
backplane.
J9 of REC1 only
connected to
Loop connector.
Note
The loops of the input signal are not genlocked.
94 6. Boards Description
EVS Broadcast Equipment SA Issue 12.05.C- November 2014

EVS XT-3 Specifications

General

Brand	EVS
Model	XT-3
Category	Server
Language	English