DA-15 Connectors
4 multi-pin DA-15 connectors (2in and 2out)
Analog Audio
The analog audio inputs and outputs are available on multi-pin (DA-15) connectors for
audio signal inputs and outputs in analog format.
See section "Audio Connections" on page 62 for more details on the connectors pinout
according to the different configurations.
The analog connector layout consists in 4 multi-pin DA-15 connectors (2in and 2out):
RS422 Ports
The RS422 ports allow the server to be remotely controlled through remote panels or
third-party control devices. When a remote panel is used, it should be connected on the
first RS422 port.
The RS422 connectors layout is as follows:
56 5. Hardware Installation and Cabling
EVS Broadcast Equipment SA Issue 12.05.C- November 2014