Extraflame Lucrezia User Manual

USER PARAMETERS
37
Chapter8
USER PARAMETERS
USER PARAMETERS
WEEKLY PROGRAMMER
Display D1 Display D2 Function
OFF UT 0 Act./Deact. Weekly programmer
00:00 UT 1 Time 1st switch-on
00:00 UT 2 Time 1st switch-o
OFF 1 UT 3
Consents for 1st switch on/o for various days
00 UT 4 Installer parameter
00:00 UT 5 Time 2nd switch-on
00:00 UT 6 Time 2nd switch-o
OFF 1 UT 7
Consents for 2nd switch on/o for various days
00:00 UT 8 Time 3rd switch-on
00:00 UT 9 Time 3rd switch-o
OFF 1 UT A
Consents for 3rd switch on/o for various days
PELLET FEED ADJUSTMENT
Display D1 Display D2 Function
00 UT F % pellet feed adjustment
SPRINGS AUTOMATIC CLEANING TIMES
Display D1 Display D2 Function
08:00 UT G Automatic cleaning start time
22:00 UT H Automatic cleaning end time
WEEKLY PROGRAMMER
The weekly programmer allows to program 3 time spans within a day to use every day of the week. The
ignition and switch-o times must be within the arc of one day, from 0 to 24 and not over several days:
E.g. switch-on 07:00 / switch-o 18:00 OK
switch-on 22:00:00 / switch-o 05:00:00 ERROR
First of all the current date and time must be set using the “current date and time adjustment” sequence
to give a reference to the function itself.
To access programming press 3, hold it down and press 5 and then release both keys together. Shift
using button 5 until“CHRONO” appears on display D1.
The table below gives all weekly programmer parameters.
Parameter
Function
Adjustment
Keys
Value
Con rmation
Key
Display D2 Display D1
ON/OFF Act./Deact. weekly programmer 2 or 3 CRONO 5
UT 1 Time 1st switch-on 2 or 3 OFF or from 00:00 to 23:50 5
UT 2 Time 1st switch-o 2 or 3 OFF or from 00:00 to 23:50 5
UT 3
Consents for 1st switch on/o for various days 2 or 3 ON/OFF 1, ON/OFF 2, … ON/OFF 7 5

Extraflame Lucrezia Specifications

General

Brand	Extraflame
Model	Lucrezia
Category	Boiler
Language	English