0.3.4 Download log to USB
Using the key, the log can be downloaded to a USB flash drive. Every time a download is
made, a folder is created with SerialNo_Date_Time_Log, creating a unique “.sts” file with all the
information.
In addition, different machine parameters are downloaded (Serial No, Model, Date, Time, Heating
type, operation mode (OPL/Self-service), Start date and SW version) for subsequent loading in the Wash-
Control.
Press to return to the log screen.
0.4 Configure alarms
On the maintenance screen, select the icon, and go to the alarm configuration screen.
Press to return to the initial SAT screen.
The following errors can be configured:
0.4.1 E4: Maximum water level reached
You can override this error by pressing . Default Enabled.
0.4.2 E3: Drainge failure / water in tub
Press the key to modify error 3, drainage failure. The time after which the error is
displayed on the screen can be configured.
The error time can be configured. Range, from 5 to 30 minutes. The default time programmed is
10 minutes.
To Next Page
Loading...
Need help?
General
