▪ Maximum (7.5 V-10 V). By default 10 V
Press to return to the initial configuration screen, or press to return to the
initial configuration screen and confirm the changes.
2.11 Import / Export files
On the initial configuration screen select the icon , and enable the import of a machine
configuration from a USB flash drive or the export of the current machine configuration to a flash drive.
When this button is pressed, an intermediate window is displayed where we select whether to
import or export (as in programmes).
If IMPORT is selected, the same screen as in programmes is displayed in order to browse through
the USB, but only configuration files (with extension .cfg) can be selected.
If EXPORT is selected, the current machine configuration is saved to the root directory of the
USB.
Press to return to the initial configuration screen.
2.12 Water saving by weight
On the initial configuration screen select the icon , and go to the water saving menu.
The required water saving for the weight can be configured. Three different options can be
selected. Depending on the option selected, there will be a reduction in the water level.
As for the weight setting, it can also be deactivated or you can select one between automatic,
manual or intelligent.
In order to select some level of Water saving you must have selected a type of weighing. If the
weighing is off, the Water saving will be deactivated as well.
To Next Page
Loading...
Need help?
General
