Fagor LAP-10 User Manual

30
1.7.1.1 Machine identifier
By pressing the key, the machine identifier can be enabled/disabled, and the number to
be allocated to the identifier can be edited (between 1 and 99) using the and
keys. By default it is disabled.
With the option this option is enabled, and to go to the identifier editor, press , and the
following screen is displayed.

Fagor LAP-10 Specifications

General

Noise Level (Spinning)	72 dB
Type	Front Load
Load Type	Front Load
Energy Rating	A
Dimensions (HxWxD)	85 x 60 x 60 cm