Fender RUMBLE STAGE 800 User Manual

AMPLIFIER AND CABINET MODELS
This table lists the preset amplier and speaker cabinet models in Rumble Studio 40/Stage 800, with a brief
description of each. Rumble models will be continually revised and updated; this manual indicates current
amp models in use at time of initial publication.
Studio Preamp
Direct-to-mixing-desk studio purity with clean, uncolored tonal response
Tube Preamp
Similar to the above, but like a tube console for increased harmonic coloration
Rumble® V3
Based on the clean-to-gritty tone of Fender’s best-selling bass amps
Bassman® TV
Based on the original-era boom of Fender’s vintage “TV-Front” Bassman
Dual Showman®
Based on the ’60s/’70s all-tube Fender classic used on big stages everywhere
’59 Bassman®
Based on Fender’s celebrated open-back 4x10 combo of the late 1950s
Rumble V2
Based on Fender’s popular Rumble V2 series of 2010-2014
Bassman® 300 Pro
All-tube giant with distinctively versatile tone shaping and blendable overdrive
Monster
High-gain all-tube boutique guitar amp model re-imagined for bass
’70s British
Inspired by a late ’60s/early ’70s Marshall Super Bass, a quintessential early hard-
rock bass amp
British Colour
Inspired by the “sludgy” majesty of 1970s-era Orange amps
British Watts
Inspired by the classic cleaner-toned British stack, the original 100-watt Hiwatt
DR103
Redhead Inspired by the full-range high-end 1990s indispensability of the SWR® Redhead
KGB-800
Based on the ’80s/’90s-era power and clarity of the Gallien-Krueger 800RB
Rockin’ Peg
Inspired by the seismic all-tube sound of the Ampeg SVT
Super Bassman
Based on the “Vintage” channel of Fender’s present-day agship bass amp
Super Bassman OD
Fender’s present-day agship bass amp, with blendable tube overdrive
’66 Flip-Top
Based on the beloved mid-’60s Ampeg B-15NF
16
AMP MODELS
Rumble, Bassman, Showman and Redhead are trademarks of FMIC. All other non-FMIC product names and trademarks appearing in this manual are
the property of their respective owners and are used solely to identify the products whose tones and sounds were studied during sound model develop-
ment for this product. The use of these products and trademarks does not imply any aliation, connection, sponsorship, or approval between FMIC and
with or by any third party.

Fender RUMBLE STAGE 800 Specifications

General

Power Output	800 Watts
Speaker Configuration	2 x 10"
Tweeter	Compression Tweeter with On/Off Switch
Color	Black
Connectivity	Bluetooth, USB
EQ	3-band EQ
Footswitch	Optional (sold separately)