Fender RUMBLE STAGE 800 User Manual

WIFI USE
Rumble Studio 40/Stage 800’s WiFi connectivity delivers easy wireless network access, enabling users to get
the latest Rumble Studio 40/Stage 800 rmware updates (see page 61). To get started, press the MENU utility
button and use the ENCODER to scroll to “WIFI,” then press the ENCODER to access WiFi settings.
The default WiFi setting is “o,” indicated by a red box labeled “WIFI OFF.” Press the ENCODER again to turn WiFi
on, indicated by a green box labeled “WIFI ON.” When WiFi is on, use the ENCODER to scroll through available
networks; select a network by pressing the ENCODER on it. If a known network is not displayed, it can be
entered manually by selecting the “ADD HIDDEN NETWORK” option at the end of the list of available networks
and using the ENCODER to enter the characters using the process described on page 11. Once a network is
chosen, select “CONNECT” from the menu shown by pressing the ENCODER on it (other options in this menu are
covered on page 40).
After choosing “CONNECT,” the amp will then prompt the entry of a password. To spell out a password, press the
ENCODER once to activate the cursor and turn it to choose a character. Press ENCODER again to enter that char-
acter and move to the next; repeat until password is complete. When password is complete, press the top LAYER
button (corresponding with onscreen prompt “done”). Successful network connection is indicated by a green
dot to the left of the network name. All steps are illustrated below and on the following page.
Note that pressing the PRESET LAYER and CONTROLS LAYER buttons also enable closing out of some menus
(indicated by an “x”) or returning to the previous step (indicated by the label “back”).
To enable WiFi, rst press the MENU utility button.
38
Use the ENCODER to scroll through the menu to “WiFi,” then press the ENCODER to access WiFi settings.
The default WiFi setting is “o” (labeled in a red box); press the ENCODER to turn WiFi on (labeled in a green box).
MENU
WiFi
BLUETOOTH
AMP SETTINGS
ABOUT THIS AMP
FOOTSWITCH
MENU
WiFi
BLUETOOTH
PRESET ORGANIZER
AMP SETTINGS
ABOUT THIS AMP
MENU
WiFi OFF
back

Fender RUMBLE STAGE 800 Specifications

General

Power Output	800 Watts
Speaker Configuration	2 x 10"
Tweeter	Compression Tweeter with On/Off Switch
Color	Black
Connectivity	Bluetooth, USB
EQ	3-band EQ
Footswitch	Optional (sold separately)