Supplemental Owner’s Manual
All CT-series vacuums have integral hose and cord storage
in the top of the vacuum, called the hose garage. The hose
garage permits the power cord and vacuum hose to be
stored in the top while simultaneously allowing for a tool’s
Systainer to be stacked on top of the vacuum (see below).
The hose garage has a slot in the rear for the power cord
to pass through, and a slot in the front for the hose to pass
page 12
for installing the optional
Power Cord Bracket.)
Power
Cord Slot
Hose Slot
All of the CT-series vacuums allow for storage and trans-
accommodate both new T-Lok and older latch style
Systainers. The CT-Mini and CT-Midi mount a T-lok style
Systainer differently than the larger vacuums, and have a
T-lok handle for securing them.
For T-Lok
Style
For Latch
Style
A
B
All CT-series vacuum have a parking brake to keep the
vacuum stationary when you don’t want it to move.
To activate the brake, press down on the brake foot until
the front wheels are off the ground.
To release the brake, press in on the brake release button.
Brake
Foot
Brake
Release
To Next Page
Loading...
Need help?
General
