Festool CT MIDI User Manual

14
CT Series Dust Extr
actors
CT-26/36 Handle Installation
1.
R
emove the motor housing from the collection canister.
2.
Carefully tilt the collection canister forw
ard so it is resting
on its front face. Prop it up so it doesn’t tip over while
you are working.
3.
Slide the 4 square retaining nuts into the pock
ets under

canister.
Square Nuts
Lower Mounting
Holes (4)
Square Nuts
4.

upper br
acket to the square nuts inserted into the canis-

5.
Using the 4 self
-tapping screws, secure the lower bracket
to the underside of the collection canister.
Upper Mounting
Screws (4)
Lower Mounting
Screws (4)
CT-48 Handle Installation
1.
R
emove the motor housing from the collection canister.
2.
Carefully tilt the collection canister forw
ard so it is resting
on its front face. Prop it up so it doesn’t tip over while
you are working.
3.

collection canister so they line up with the screw holes in

tow
ard the inside of the collection canister.
Lower
Nutplates (2)
Nutplate, This
side down.
4.
Slide the 4 square retaining nuts into the pock
ets above

Square Nuts
5.

screws into the square nuts.

Festool CT MIDI Specifications

General

Brand	Festool
Model	CT MIDI
Category	Vacuum Cleaner
Language	English