EasyManuals Logo
Home>FiberHome>Modem>AN5506-01-A

FiberHome AN5506-01-A User Manual

FiberHome AN5506-01-A
78 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #45 background imageLoading...
Page #45 background image
4 Web Configuration Guide
Table 4.3 Parameters for Broadband Settings (Continued)
Item
Description
Secondary
DNS Server
Enter the IP address of the standby
DNS server provided by ISP.
IPv6 Prefix
Enter the static IPv6 address prefix
at the WAN side provided by the
ISP.
IPv6
Address
Obtain
Mode
Selects the IPv6 address obtaining
mode.
This item should be
configured when the
IP Mode is set to
IPv4&IPv6 and the
WAN IP Mode is set to
DHCP or PPPoE.
Prefix_title
Selects the IPv6 address prefix
obtaining mode.
4.3.3 DHCP Server
Using the DHCP function, the ONU can distribute the network
parameters (such as IP address, gateway and DNS server IP address)
to the devices (such as computer) within the LAN. Users can
manage the IP addresses collectively using the function.
1. Select Network in the navigation bar. Select DHCP Server
from the left link bar to open the DHCP server configuration tab,
as shown in Figure 4.9.
41

Other manuals for FiberHome AN5506-01-A

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the FiberHome AN5506-01-A and is the answer not in the manual?

FiberHome AN5506-01-A Specifications

General IconGeneral
BrandFiberHome
ModelAN5506-01-A
CategoryModem
LanguageEnglish

Related product manuals