4 Web Configuration Guide
1. Select Security in the navigation bar and select Remote
Control in the left link bar to open the remote control
configuration tab, as shown in Figure 4.16.
Figure 4.16 Remote Control
2. Enable or Disable the remote access control as required.
3. Click Apply to save and apply the configuration.
4.4.3 DDOS
The DoS attack exhausts the resource of target computer using
massive virtual information flow, so that the attacked computer has
to handle the virtual information with all strength, which influences
the handling of normal information flow. The ONU provides the
protection against the DoS attack.
1. Select Security in the navigation bar and select DDOS in the
left link bar to open the anti-dos attack tab, as shown in Figure
4.17.
Figure 4.17 DDOS
2. Select to Enable or Disable the anti-dos attack function as
required.
3. Click Apply to save and apply the configuration.
52