FiberHome HG6543C User Manual

3 Web Configuration Guide
2. Select Enable and set ACL Mode and ACL Type. Then click Add to open the
ACL rule list configuration page, as shown in Figure 3-36.
Figure 3-36 ACL Configuration Rule
3. Configure parameters relevant to filtering as required. For details of the
parameters, see Table 3-22.
4. Click Apply to generate the corresponding ACL rule item.
5. Click Submit to save and apply the configuration.
Table 3-22 Parameters for ACL Configuration
Item
Description
ACL Enable Select to enable or disable the access control.
After setting, click
Submit at the
upper right part to
apply the settings.
ACL Mode
Select the access control mode.
u Whitelist indicates that the data complying with
the rules in the ACL rule table will be allowed to
pass.
u Blacklist indicates that the data complying with
the rules in the ACL rule table will not be allowed
to pass.
ACL Type
The options include IP, IP+Mac and IP+Mac+Vid.
Modifying the ACL type will delete all the existing ACL
rules.
Version: A
65

FiberHome HG6543C Specifications

General

Brand	FiberHome
Model	HG6543C
Category	Network Router
Language	English