FiberHome HG6543C User Manual

3 Web Configuration Guide
2. Enable or disable the FTP server function according to the requirement.Select
Enable and then enter the Username and Password for connection with the
FTP server.
3. Click Apply to save and apply the configuration.
3.6.2.63.6.2.6 Device Reboot
1. Select Management in the navigation bar. Select Device Management→
Device Reboot from the left link bar to open the device reboot page, as shown
in Figure 3-54.
Figure 3-54 Device Reboot
2. Click Reboot and click OK in the alert box that appears and wait for the device
to reboot.
Caution:
Save the configuration data before rebooting the device to prevent loss of
the data.
After the device is rebooted, wait for about two minutes before next login
to the Web GUI of the device.
3.6.2.73.6.2.7 NTP Time Calibration
Users can obtain the precise time by connecting the ONT to an NTP server.
1. Select Management in the navigation bar. Select Device Management→NTP
Check Time from the left link bar to open the NTP check time page, as shown
in Figure 3-55.
Version: A
79

FiberHome HG6543C Specifications

General

Brand	FiberHome
Model	HG6543C
Category	Network Router
Language	English